Mitsubishi 2013 Outlander Service Manual page 183

Hide thumbs Also See for 2013 Outlander:
Table of Contents

Advertisement

Features and controls
CAUTION
!
If the selected drive mode indicator is blinking, the
vehicle switches automatically to front-wheel drive
in order to protect the drive-system components,
and drive mode selection is no longer possible with
the drive mode-selector.
The warning display is also displayed in the infor-
mation screen in the multi-information display.
Reduce speed, and if the indicator goes out after
driving a while, resume driving as before. If the indi-
cator continues blinking for more than about 5 min-
utes, have the vehicle inspected at an authorized
3
Mitsubishi Motors dealer or a repair facility of your
choice as soon as possible.
Type 1
Type 2
3-86
CAUTION
!
The warning display on the information screen in
the multi-information display, a problem has
occurred with the electronically controlled 4WD sys-
tem and the safety device has activated. Have an
inspection made by an authorized Mitsubishi
Motors dealer or a repair facility of your choice as
soon as possible.
Type 1
CAUTION
!
Always use tires of the same size, type, and brand
that have no wear differences. Using tires that differ
in size, type, brand, or wear amount may activate
the protection of the drive-system components, caus-
ing the drive mode in "4WD AUTO" mode to lock or
the "4WD" and "LOCK" indicators to blink alter-
nately.
I n f o r ma t i o n P r o v i d e d b y :
Type 2

Advertisement

Table of Contents
loading

Table of Contents