Table of Contents
Advertisement
NOTE
If the cruise control is on when the following operation is
performed, cruise control will be on automatically the
next time you start the engine. The "CRUISE" indicator
light will also be on.
[Except for vehicles equipped with the F.A.S.T.-key]
Turn the ignition switch to the "OFF" or "ACC" position.
[Vehicles equipped with the F.A.S.T.-key]
Put the operation mode in OFF or ACC.
If the battery voltage is insufficient, the memory data for
the cruise control may be erased.
As a result, the "CRUISE" indicator light may not come
on when you restart the engine.
If this happens, press the "ON OFF" switch once again to
turn on the cruise control.
2. Accelerate or decelerate to your desired speed, then press
and release the "COAST SET" switch (B) when the
"CRUISE" indicator light is illuminated. The vehicle will
then maintain the desired speed.
NOTE
When you release the "COAST SET" switch, the vehicle
speed will be set.
I n f o r ma t i o n P r o v i d e d b y :
Features and controls
3
3-109
Advertisement
Chapters
Table of Contents
