Mitsubishi 2013 Outlander Service Manual page 132

Hide thumbs Also See for 2013 Outlander:
Table of Contents

Advertisement

Turn signal light deactivation/reactivation
The answerback function from the turn signal lights can be
turned ON or OFF separately.
1. Put the operation mode in OFF.
2. Open the driver's door and turn the combination head-
lights and dimmer switch to the "OFF" position.
3. Press the UNLOCK button (2) for 4 to 10 seconds and
press the LOCK button (1) during this time.
4. Release in sequence the UNLOCK and LOCK buttons
within 10 seconds of pressing the LOCK button in step 3.
Number of chimes To lock
One chime
One flash
Two chimes
One flash
Three chimes
No flash
Four chimes
Two flashes
Five chimes
No flash
Six chimes
Two flashes
Seven chimes
No flash
NOTE
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to the separate operation manual.
Buzzer deactivation/reactivation
The buzzer answerback function can be turned ON or OFF as
required.
NOTE
Setting of door and liftgate unlock function
The door and liftgate unlock function can be set to the follow-
ing two conditions.
Each time the door and liftgate unlock function is set, a chime
will sound to tell you the condition of the door and liftgate
unlock function.
To unlock
Number of
Two flashes
No flash
One chime
Two flashes
Two chimes
One flash
1. Put the operation mode in OFF.
One flash
2. Open the driver's door and turn the combination head-
No flash
3. Press the LOCK button (1) for 4 to 10 seconds and press
No flash
4. Release in sequence the LOCK and UNLOCK buttons
NOTE
I n f o r ma t i o n P r o v i d e d b y :
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to the separate operation manual.
chimes
All doors and the liftgate unlock
Driver's door unlock only
lights and dimmer switch to the "OFF" position.
the UNLOCK button (2) during this time.
within 10 seconds of pressing the LOCK button in step 3.
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to the separate operation manual.
Features and controls
N00544600072
Condition
3-35
3

Advertisement

Table of Contents
loading

Table of Contents