Mitsubishi 2013 Outlander Service Manual page 233

Features and controls
Information screen (With the ignition switch is
turned from the "OFF" position to the "ON"
position or the operation mode is changed from
OFF to ON)
When the ignition switch is turned to the "ON" position or the
operation mode changed to ON, the display screen switches in
the following order.
Type 1
3
Type 2
1- Screen when the ignition switch or operation mode is OFF)
2- System check screen
3- Screen when the ignition switch or operation mode is ON)
3-136
System check screen
When the ignition switch is turned to the "ON" position or the
operation mode is changed to ON, the system check screen is
displayed for about 4 seconds. If there in no fault, the informa-
tion screen is displayed.
N00555800191
If there is a fault, the screen changes to warning display.
Refer to "Warning display list (With ignition switch or opera-
tion mode in ON)" on page 3-167.
Type 1
NOTE
The system check screen display varies depending on
your equipment.
I n f o r ma t i o n P r o v i d e d b y :
Type 2