Chapter 2 - Installation; Mounting A Lens - GRASS VALLEY LDX 86WorldCam User Manual

Chapter 2
Installation

2.1 Mounting a lens

To attach a lens to the camera head proceed as follows:
1. Ensure that the lens locking ring (1) is in the unlocked position (turned counterclockwise).
2. If present, remove the dust protection cap.
3. Slot the lens into the lens mount.
4. Turn the lens locking ring (1) clockwise until the lens locks firmly in place.
5. Connect the lens cable to the lens connector at the right side of the camera.
✎
Tip
Use the clips (2) on the front of the camera to guide the lens cable along the camera body.
2
2
LDX 86 High Frame Rate/HD/3G/4K Camera Platform User's Guide (v2.0)

Chapter 2 - Installation

1
23