Chapter 2 - Installation; Mounting A Lens - GRASS VALLEY LDK 8000 Elite User Manual

Chapter 2
Installation

2.1 Mounting a lens

To attach a lens to the camera head proceed as follows:
1. Ensure that the lens locking ring (1) is in the unlocked position - turned counterclockwise.
2. Remove the dust protection cap (2).
3. Slot the lens into the lens mount (3).
4. Turn the lens locking ring (1) clockwise until the lens locks firmly in place.
5. Connect the lens cable to the lens connector (4) at the right side of the camera.
6. Place the lens cable into the bottom clip at the front of the camera and clip (5) located at
the side.
Figure 2-1. Lens mounting
LDK 8000 Elite/4000 Elite System camera User's Guide (v1.01)
4
3
5

Chapter 2 - Installation

1
2
21