Chapter 2
Installation
2.1 Mounting a lens
To attach a lens to the camera head proceed as follows:
1.
Ensure that the lens locking ring (1) is in the unlocked position - turned counterclockwise.
2.
Remove the dust protection cap (2).
3.
Slot the lens into the lens mount (3).
4.
Turn the lens locking ring (1) clockwise to lock the lens in place.
5.
Connect the lens cable to the lens connector (4) at the right side of the camera.
6.
Place the lens cable into the bottom clip at the front of the camera and clip (5) located at
the side.
Figure 2-1. Lens mounting
LDK 8300 High-speed HD camera User's Guide (v4.0)
4
3
5
Chapter 2 - Installation
1
2
19