Setting Up Tracker Headset - GRASS VALLEY LDX 86WorldCam User Manual

Go to the OPERATOR TOOLBOX > USER BUTTONS > BUTTONS menu to assign user buttons to
intercom functions:
• SW1—assigns a function to user button SW1: Call, Ext1, Ext2, Prod, Eng, Select.
• SW2—assigns a function to user button SW2: EIris, Zoom, FocAst, Ext1, Ext2, Prod, Eng.
• VTR Lens—assigns a function to the VTR Lens button: Prod, Eng, Zoom, Ext1, Ext2.
• Handgrip Left—assigns a function to the left side button underneath the camera
handgrip: Prod, Eng.
• Eng Mode—selects switching mode for the engineering channel selection button at the
back panel of the camera: momentary (push) or alternating (toggle).

3.10.6 Setting up Tracker headset

Go to the CONFIGURATION > INTERCOM > TRACKER menu to change settings for the Tracker
headset.
Function
Tracker Mic To
Tracker Mic Gain
Tracker Mic Pwr
Tracker Mic Src
LDX 86 High Frame Rate/HD/3G/4K Camera Platform User's Guide (v2.0)
Values Default
Off, Cam, Eng, Prod, Off
All
0 dB, 40 dB 40 dB
Off, On Off
Eng, Side Side
Chapter 3 - Operating instructions
Description
Selects the Tracker microphone routing.
Selects gain of camera Tracker's intercom
microphone.
Switches bias tee power (12 VDC) to the Tracker's
microphone on or off.
Selects Engineering channel or Tracker's microphone
sidetone for tracker's headphone.
53