Figure 22 Ptz Control Page-Patrol - Grandstream Networks GVR3550 User Manual

PATROL
When set PTZ to patrol, users could edit and use patrol path on the control panel. The factory default setting
is 4 empty patrol paths. See figure 21.
Figure 22 PTZ Control Page—Patrol
1. Set PTZ to patrol;
2. Select the patrol path;
3. Set the residence time the patrol path stays at each preset;
4. Click on to add key point and set it as one preset. Users could click on to delete the preset;
5. Click on before the patrol path, when it turns to a triangle , PTZ will rotate according to the path.
Click again to stop patrol.
PATTERN
When set PTZ to pattern, users could edit and use pattern on the control panel. The factory default setting is 3
empty patterns. See figure 22.
GVR3550/GVR3552 User Manual Page 42 of 121
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299