Table 25 IO Alarm Config Parameters Explanation
Parameter
Input Port
Event Type
Alarm Enable
Alarm Status
Port Name
Alarm Schedule
Users could set various alarm linkages according to different alarm such as Screen Prompt, Beeper, HDMI
Alarm, Send Email, or Copy Alarm to Other Cameras. The Parameters settings are the same in chapter
Camera Event Settings.
GVR3550/GVR3552 User Manual
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 51 IO Alarm Config Page
Select the input port.
Select the event type.
Check to enable/disable alarm.
Set alarm status. Normally Open (default) and Normally Close are two available
options. Please choose the status according to your alarm type.
Enter port name for users to distinguish different input ports.
Select alarm schedule in the drop-down list. If there is no existing schedule, click
on
to add new schedule. The alarm only available in schedules.
Explanation
Page 67 of 121