Local Preview; Preview Status; Table 11 Preview Page-Camera Status Explanation; Table 12 Preview Status Explanation - Grandstream Networks GVR3550 User Manual

LOCAL PREVIEW

GVR3550/GVR3552 would directly enter live preview screen once booted up, users could preview the live
preview screen without login but unable to make any operations. Only after logged in users could make basic
preview operations and other setups.

PREVIEW STATUS

Preview camera status: The camera has not been added, camera preview, connecting the camera, camera
connection failed.
Table 11 Preview Page–Camera Status Explanation
Icon
Add camera
Camera preview
--
Camera
connection
Failed
Stop preview
when recording
Failed
On the preview page, the recording and alarm status of each camera could be distinguished by the tag on the top
right corner of each camera.

Table 12 Preview Status Explanation

Icon
Motion Detection
Alarm
I/O Alarm
(camera)
Signal Loss
Recording
GVR3550/GVR3552 User Manual
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Name
If there is no existing camera, click this button to quick enter the
camera settings page to add camera.
Display camera preview page.
Failed to connect camera.
The insufficient performance of GVR may cause preview failure. Tap
on the icon to preview the closed page.
Name
Alarm when detecting dynamic motion in detection area.
Alarm when the remote camera is connected to IO alarm device.
Alarm when no signal detected.
The monitoring camera is in recording mode.
Explanation
Explanation
Page 36 of 121