Figure 79 S.m.a.r.t. Detection Page; Table 37 Hdd S.m.a.r.t Detection Parameters Explanation - Grandstream Networks GVR3550 User Manual

HDD DETECTION
GVR3550/GVR3552 provides S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) detection
and bad sector detection. Users could view HDD running status via HDD detection.
S.M.A.R.T detection provides detection like HDD heads, temperature, material of disk surface and
forecasting the underlying problems of HDD that may occur in time.
S.M.A.R.T detection page is as shown in Figure 78 below.

Table 37 HDD S.M.A.R.T Detection Parameters Explanation

Parameter
Continue Use
HDD after Self-test
Failed
HDD No.
Detection Type
Start
HDD Temperature
Usage Time
Detection Status
Evaluation Result
Overall Evaluation
The HDD bad sector could be detected via bad sector detection as shown in figure 79.
GVR3550/GVR3552 User Manual
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 79 S.M.A.R.T. Detection Page

the Continue to use the HDD if self-test failed in the process of S.M.A.R.T. Detection.
Note: Once enabled, it may cause HDD error, please be careful!
HDD Number 1-4 will be allocated in sequence after HDD installation, the number
will not be changed in the subsequent use.
Set S.M.A.R.T. detection type: Short, Long, Conveyance.
Click the button to start S.M.A.R.T. detection.
Display HDD temperature S.M.A.R.T detection detected.
Display total HDD usage time S.M.A.R.T detection detected.
S.M.A.R.T detection results.
S.M.A.R.T detection results on HDD status.
Display overall HDD status after detection.
Explanation
Page 92 of 121