Figure 41 Camera Event Settings Page; Table 22 Camera Events Settings Parameters Explanation - Grandstream Networks GVR3550 User Manual

CAMERA EVENT SETTINGS
Camera event settings page is as shown in figure 40, Users could set different alarm types to each camera.

Table 22 Camera Events Settings parameters Explanation

Parameter
Camera
Event Type
Alarm Enable
Alarm Schedule
Region Config
PTZ Linkage Config
GVR3550/GVR3552 User Manual
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 41 Camera Event Settings Page

Select camera.
Motion Detection, Signal Loss, IPC External Alarm.
Check to enable/unable alarm.
Select schedule in the drop-down list. Tap on
Set detection area to IPC with motion detection function. Users could set up to 16
areas. Click left mouse to draw an area, then release the mouse to confirm. Click
on "X" in the upper right corner of the area to delete it, Double click or right click
mouse to save the area and exit.
Only available to camera with PTZ linkage function. For different camera and
event type, users could set various alarms: Screen Prompt, Beep, HDMI Alarm,
Explanation
to add a schedule.
Page 57 of 121