Selecting Appliance Location; Clearances To Combustibles - Quadra-Fire HUDSON BAY HUDBAY-FS Owner's Manual

3
Appliance Location and Clearances
NOTE:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see Figure 3.1).
NOTE: For actual appliance dimensions refer to Section 12.
B. Clearances
A
E
Hudson Bay
Figure 3.1
It is permissible to place the appliance on carpet.
!
Some carpet materials may be sensitive to radiant heat from
the appliance causing discoloration or odor.
NOTE: Flooring beneath appliance may reach 90 degrees
plus room ambient temperature. Check with flooring
manufacturer for maximum temperature allowed on flooring
surfaces.
Page 7
D
B
A
C
E
Model
9-5/8
Inches
219
Millimeters
CAUTION
Quadra-Fire • Hudson Bay • 7003-121_R20 • 11/14
F
F
A B C D
1 36 46-1/2
25 91 118
!
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffic areas.
!
WARNING
Fire Risk.
• Locate and install appliance to all clearance
specifications in manual.
G
E F G H
9 4 54 21
229 102 137 533
!
WARNING
Fire Risk.
Odor Risk.
Tipping Risk
• Install appliance on a stable, level platform/
floor strong enough to support appliance
without tipping.
• USE wood flooring, ceramic tile, brick hearth
or high pressure laminate flooring applied
directly over the sub-flooring material.
H