Switch Slip & Grip On And Off - Man D2868 LE433 Operating Instructions Manual

Switch SLIP & GRIP on and off
Prerequisite: The vessel must be equipped with a trolling transmission.
The transmission function "SLIP & GRIP" is a combination of trolling in the lower lever range and normal
operation in the upper lever range. This enables a more precise control of vessel speed at slower speeds.
However, maximum speed can be selected at any time.
Danger:
On switching off the "SLIP & GRIP" the vessel can undergo moderate accelerations.
Switch on Slip & Grip
1. Set the lever on the active control console in the "Neutral" detent.
2. Press button.
The LEDs
Switch off Slip & Grip
The "SLIP & GRIP" transmission function can be switched off at any lever position.
1. Press button.
The LEDs
Adjust display brightness
Switch over between day and night mode
Hold button pressed and
A repeated brief press of the button
Commissioning and operation
light.
go out.
press briefly.
always switches between the day and night mode.
85