Buttons; Operational Functions And Configuration - Man D2868 LE433 Operating Instructions Manual

Buttons

Figure: Numbering of the operating buttons

Operational functions and configuration

The operation of the system and the display adjustment is carried out with the display buttons or the re­
mote control MMDS-CLCB 6.5.
The following functions are incorporated:
Standard function: Call the alarms table, or browse to further alarm pages.
Additional function: If pressed longer than 5 seconds ⇒ Switches configuration menu on and off.
Standard function: Page back to the previous page
Additional dimming function: On simultaneous actuation of the buttons
the brightness is reduced.
Additional function in the menu: Change parameter / reduce value.
Standard function: page up to the next page.
Additional dimming function: On simultaneous actuation of the buttons
the brightness is increased.
Additional function in the menu: Change parameter / increase value.
Standard function: Acoustic and optical acknowledgement of all monitoring devices connected to
the same CAN-Bus.
Additional dimming function: Adjustment of the brightness on simultaneous actuation of the but­
tons and
Test function: If currently no alarm is on, or if all alarms have previously been optically acknowled­
ged, after an actuation for longer than 5 seconds a horn test is carried out, i.e. the internal sum­
mer and the horn relay are activated for the duration of the button press.
Commissioning and operation
.
38
1
2
3
4
5
6
(4) and (3)
(4) and (2)