Description Of Acoustic Signal Transmitter; Activate Control Console; Select Control Head - Man D2868 LE433 Operating Instructions Manual

Description of acoustic signal transmitter

Warnings and alarms can be reproduced via the acoustic signal transmitter..
Interval signal
Event
tone
fast actuation of the button
Initialisation of the connected control
slow
actuation of the button
Continuous tone Fault alarm of the connected control

Activate control console

If the control is switched on via the master switch, first all control consoles are initialised.
This is indicated by a slow flashing LED on each control console.
D
D and an unbroken acoustic signal.
During the initialisation
D the control consoles are inactive and
D the vessel cannot be controlled from any control console.

Select control head

Select the control head by actuating
TheLEDs and signal tone stop on all other control consoles.
If the levers are not in the "Neutral" position, the LEDs continue to flash
nal tone remains the same.
If necessary, place the lever in the "Neutral" position.
The LEDs
Extinguish the LEDs by
The control console is active and the engine can be started.
Commissioning and operation
the button.
now flash quickly and the signal tone is faster.
pressing the button again
79
Meaning
Handover of the control console possible
Handover of the control console is requested
Handover of the control console not possible
Alarm
.
and the sig­