Description of buttons
Button
Function
Request command
Accept command
Engine warm up
Acknowledge alarm
Adjust brightness of LEDs
Automatic synchronisation of the en
gine speeds for twin engine layouts
Switch on and off the "Slip & Grip" ope
rating function
Switch on and off the "Trolling" opera
ting function
Description of LEDs
LED
Function
Flashes slowly:
Command requested,
Handover not possible
Flashes rapidly:
Command requested,
Handover possible
Continuously lit:
Command active
Continuously lit:
Engine speed adjustment possible
Gearbox "Neutral"
Flashes:
Speed synchronisation is in stand-by-
mode
Continuously lit:
Speed synchronisation active
Continuously lit:
Trolling active
Continuously lit:
Slip & Grip active
Continuously lit:
Alarm
Commissioning and operation
see
"Activate control console", see page 79
"Change control console", see page 80
"Engine Warm Up", see page 81
"Acknowledge alarm", see page 86
"Adjust brightness" see page 85
"Synchronise engine speed", see page 81
Switch "Slip & Grip on and off", see page 85
Switch "Trolling on and off", see page 84
78
Separate display for port and starboard
engine
yes
yes
no
no
no
yes