Ambience - Roland HandSonic HPD-20 Owner's Manual

Sound Editing

Ambience

This effect unit adds reverberation, creating the sensation that you're performing in a hall or studio.
You can adjust the amount of ambience for each instrument assigned to each pad.
Applying ambience
1.
Choose MENU g FX g AMBIENCE g SEND g PAD.
The AMBIENCE SEND–PAD screen will appear.
2.
Strike a pad to select it, and use the cursor [ ] [ ] buttons to select
instrument A/B.
3.
Use the value knob to edit the value.
This specifies the amount of ambience that will be applied.
With a setting of "0, " no ambience will be applied.
* Even if you're applying a multi-effect to an instrument, the ambience will be applied to the sound before it has been
processed by the multi-effect. You can also apply ambience to the sound produced by the multi-effect (p. 29).
* You can also use the MENU g INST g EDIT parameter "Amb Send. "
Selecting the ambience type
1.
Choose MENU g FX g AMBIENCE g TYPE.
The AMBIENCE–TYPE screen will appear.
2.
Use the value knob to specify the ambience type.
With a setting of "OFF, " no ambience will be applied.
Ambience type list
No. Name
1 BOOTH
2 STUDIO
3 BASEMENT
4 JAZZ CLUB
5 ROCK CLUB
* For details on each type, refer to "Sound List" (PDF file).
28
Explanation
Recording booth
Recording studio
Underground room with numerous
reflections
Small club
Large club
No. Name Explanation
6 BALLROOM Dance hall
7 CONCERT HALL Large concert hall
8 EXPO HALL Broad space
9 GATE Reverberation is cut off sharply
10 SPIRAL Spiral-like reverberation
AMBIENCE SEND–PAD screen
AMBIENCE–TYPE screen