Applying Ambience To The Entire Kit (Ambience); Applying Mfx To Each Pad (Mfx) - Roland TAIKO-1 Reference Manual

Applying Ambience to the Entire Kit
Here's how to apply ambience to a kit.
1 .
On the EFFECTS screen, select
press "SELECT"
(F2 button)
The AMBIENCE screen appears.
2 .
Strike to select the pad that you want to set .
3 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
Parameter Value
[ H ] [ I ] buttons
[+] [-] buttons
Ambience Sw OFF, ON
-INF, -60.0–+12.0
Level [dB] (in units
of 0.5)
Type TYPE 1–5
Width 0–9
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
4 .
Press "AMB SEND"
(F2 button)
The AMBIENCE SEND screen appears.
5 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
Parameter Value
[ H ] [ I ] buttons
[+] [-] buttons
PAD1H
-INF,
PAD1R
-60.0–+6.0 [dB]
PAD2H
units of 0.5)
PAD2R
6 .
Press the F1 button several times to return to the top
screen .
(Ambience)
"Ambience" and then
.
Explanation
Turns the ambience on/off.
Adjusts the reverberation volume.
Sets the type of reverberation.
Adjusts the ambience spread.
Adjusts the boost/cut of the low frequency
range.
Adjusts the boost/cut of the high frequency
range.
.
Explanation
These parameters adjust how much
(in
ambience is applied to each pad.
Editing Sounds and Other Settings for Kits (Kit Edit)
Applying MFX to Each Pad
Here's how to apply a multi-effect (MFX) to each pad.
1 .
On the EFFECTS screen, select
"SELECT" .
(F2 button)
The MFX screen appears.
2 .
Strike to select the pad that you want to set .
3 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
Parameter Value
[ H ] [ I ] buttons
[+] [-] buttons
Pad PAD1H–PAD2R
OFF,
MFX Assign
MFX1–3
-INF, -60.0–+6.0
Send Level [dB] (in units of
0.5)
Wet Only
Wet Only Sw
Dry+Wet
4 .
Press "MFX1"
(F2 button)
Use the F1 and F2 button to select MFX1–3.
F2
F1
MFX1 screen
5 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
The effect changes when you change the TYPE.
& For details on the MFX parameters, refer to
6 .
Press the F1 button several times to return to the top
screen .
(MFX)
"MFX" and then press
Explanation
Selects the pad to set.
Selects the multi-effect that is applied for
each pad.
Adjusts the amount of effect applied for
each pad.
Only the effect sound is output.
The dry sound and effect sound are both
output.
to edit the MFX .
F2
F1
MFX2 screen MFX3 screen
"MFX List" (p. 45).
19