Overall Settings For A Kit; Adjusting The Volume Of The Kit; Adjusting The Pad Sensitivity; Naming A Kit - Roland HandSonic HPD-20 Owner's Manual

Overall Settings for a Kit

These settings let you adjust the volume of the entire kit, or assign a name to it.

Adjusting the Volume of the Kit

This setting adjusts the overall volume of the entire kit.
This is convenient when a multi-effect has caused the volume to increase, or if you want to adjust the volume balance relative
to other kits.
1.
Choose MENU g KIT g KIT PRM g COMMON.
The KIT COMMON screen will appear.
2.
Use the cursor [ ] [ ] buttons to select the "Kit Volume" parameter.
3.
Use the value knob to adjust the value.

Adjusting the Pad Sensitivity

This setting adjusts the pad sensitivity for the entire kit. You can use this to adjust the sensitivity between kits that you play
using your hand and kits that you play using your fingers.
1.
Choose MENU g KIT g KIT PRM g COMMON.
The KIT COMMON screen will appear.
2.
Use the cursor [ ] [ ] buttons to select the "Pad Sensitivity" parameter.
3.
Use the value knob to adjust the value.
Moving the setting closer to the "FINGER" side will increase the sensitivity.

Naming a Kit

You can assign a name to a kit you've edited.
1.
Choose MENU g KIT g KIT PRM g NAME.
The KIT NAME screen will appear.
2.
Enter a name.
Enter a name using the buttons listed below.
You can enter a kit name (upper line) of 12 characters, and a sub-
name (lower line) of up to 16 characters.
Button
Value knob
[-] [+] buttons
Cursor [ ] [ ] buttons
Cursor [ ] [ ] buttons
[F1] (DELETE) button
[F2] (INSERT) button
[F3] (A a 1) button
Explanation
Change the character.
Move the cursor.
Move the cursor between the kit name and the sub-name.
Deletes the character at the cursor location.
Inserts a space at the cursor location.
Switches the type of character (uppercase/lowercase/numeral) at the cursor location.
KIT COMMON screen
KIT COMMON screen
Cursor
Kit name
Sub-name
KIT NAME screen
31