Page 1
Designer Series Multi-channel Loudspeaker Protection Unit 19” Rack Mount,1U, 8-channel, Designer Series Multi-Channel Loudspeaker Protection Unit Made in the USA and England Triad Speakers, Incorporated - Portland, Oregon www.triadspeakers.com HPF-8 - Setup Manual HPF-8 VER .00 2010.09.01...
LOUDSPEAKERS - Make sure that your HPF unit is set up internally for your specific DS model(s). See Page 5. The HPF-8 is preset at the factory for use with the DS 500 loudspeaker.
If you find that the DesignerSeries automatically reduces the audio volume from the loudspeakers frequently it may suggest To set the jumpers the lid of the HPF-8 must be removed by carefully unscrewing the four machine screws on the sides of that the amplifier being used is too powerful or that the layer of plaster over the speakers is too thick.
Page 4
Diagram 5: HPF-8 rack mounting points detail Alternatively, the HPF-8 can the placed on a shelf. Other equipment (up to 10kg/22lbs) may be placed on top if necessary. Take care not to scratch the top of the case and that any weight is not directly over the centre of the HPF-8.
Page 5
Limiter Loudspeaker and HPF unit Warranty ten (10) years. This limited warranty period begins on the date of purchase This limited warranty is extended only to Triad products and is expressly in lieu of all other warranties expressed or implied.
Need help?
Do you have a question about the HPF-8 and is the answer not in the manual?
Questions and answers