Before You Start - Important Notes; Serial Numbers & Nameplate; Using The Unit Safely; Warning - Native Instruments Guitar Rig Mobile Hardware Reference Manual

2 Before you Start – Important Notes
First things first; before using GUITAR RIG MOBILE, it is advised that you read this chapter
carefully.
2.1 Serial Numbers & Nameplate
GUITAR RIG MOBILE comes with two serial numbers. The GUITAR RIG MOBILE I/O hardware
serial number can be found on the bottom of the product, while the serial number for the
included version of GUITAR RIG 4 is located on the cover of the installation CD.
The nameplate is located on the bottom of the product. It lists the product model name and
other technical information.

2.2 Using the Unit Safely

Please read the following instructions thoroughly to prevent from health risks and damaging
the product.

2.2.1 Warning

To prevent hearing damage, always follow these important security advices:
•
This Product, in combination with an amplifier, headphones or speakers, can produce
sounds in decibel ranges that may cause hearing damage.
•
For protection, set all volume levels to a minimum before using GUITAR RIG MOBILE I/O.
Gradually raise the volume controls while music is playing to set the desired listening level.
•
Do not operate it at high volume levels for long periods. If you experience any hearing prob-
lems or ringing in the ears, consult an audiologist immediately.
GUITAR RIG MOBILE – 7