Configuring Guitar Rig 4 - Native Instruments Guitar Rig Mobile Hardware Reference Manual

5.3.1 Configuring GUITAR RIG 4

We will now set up GUITAR RIG 4 to use the GUITAR RIG MOBILE I/O audio interface. Start
the software before you proceed.
1. Start GUITAR RIG 4. When the software is started for the first time, you will be prompted
with the Audio Setup window automatically, where you need to make the following set-
tings. If you want to access these settings later, select GUITAR RIG 4 > Preferences from
the program menu.
2. On the "Audio" tab, choose CoreAudio as the "Driver" interface.
3. Select GUITAR RIG MOBILE I/O from the "Device" dropdown menu.
If GUITAR RIG MOBILE I/O does not appear in the list even though it is connected, something
went wrong. Restart the installation as explained in section 5.1.
GUITAR RIG MOBILE – 29