Hardware Installation - Native Instruments Guitar Rig Mobile Hardware Reference Manual

In case you want to install the hardware drivers only, a separate driver installer file is available
on the installation CD. You can also download its latest version from the Support section of
the Native Instruments website.

4.2 Hardware Installation

Use the supplied USB cable to connect the GUITAR RIG MOBILE I/O directly to a USB 2.0
port on your computer.
GUITAR RIG MOBILE I/O is powered via USB. Operation is guaranteed only with a USB 2.0
controller as a single device or with self-powered USB 2.0 hubs. On Windows XP systems,
Service Pack 2 is required for GUITAR RIG MOBILE I/O to work – you can find out about your
Windows version in the System Properties window.
GUITAR RIG MOBILE – 15