Connecting The Output - Native Instruments Guitar Rig Mobile Hardware Reference Manual

on the left hand side of the Input Meter to deactivate the right input channel. This will route
the mono signal to both input channels.

5.4.3 Connecting the Output

GUITAR RIG MOBILE I/O provides a stereo output which works both for amplification systems
and for headphones. Keep in mind that using a mono cable (like a guitar cable) will result in
the transmission of one channel only – you might need a split (insert cable / y-cable) to route
both channels to the inputs of your amplification system.
Use a stereo cable to connect the GUITAR RIG MOBILE I/O to devices that feature a stereo
input jack.
Before turning on your power amplification system or putting on your headphones, make sure
that the output level of the audio interface is turned down.
GUITAR RIG MOBILE – 34