Power Supply; Dimensions And Weight - Native Instruments Guitar Rig Mobile Hardware Reference Manual

Headphone Output
Load Impedance
Maximum Output Level
(100 ohms load)
SNR (weighted)
THD+N (100 ohms)
Frequency Response (+/- 1 dBu)

7.3 Power Supply

Via USB 2.0 interface, 5V/ 500mA bus power
No additional power supply or battery is needed, only power from the USB is required.
However, proper operation is guaranteed only when MOBILE I/O is used as a single device
with a USB 2.0 controller, or with a self-powered USB 2.0 hub.

7.4 Dimensions and Weight

Dimensions: 90 x 58 x 24 mm (3.54 x 2.28 x 0.94 in)
Weight: 90 g (0.198 lb)
16 - 600 ohms
2.165 V RMS (load 100 ohms), 4.345 V RMS
(no load)
100 dB
0.06%
10 - 40000 Hz
GUITAR RIG MOBILE – 44