Audio Connections And Levels; Connecting The Input And Adjusting The Input Level - Native Instruments Guitar Rig Mobile Hardware Reference Manual

4.4 Audio Connections and Levels

In the following chapters you will learn how to connect your guitar and your monitoring sys-
tem to the GUITAR RIG MOBILE I/O and how to set the right amplification levels both on the
hardware and on the software side of your setup.
Please start GUITAR RIG 4 before you proceed.

4.4.1 Connecting the Input and Adjusting the Input Level

1. Turn down the volume on your monitoring system to prevent hearing damages.
2. Plug the cable connected to your guitar or bass into the input jack socket of the interface.
Mind that, for an instrument that generates a stereo signal, you might need a split (insert
cable / y-cable, not included) to route both channels to the stereo input jack.
In order to achieve the best sound quality by providing the interface with a sufficiently power-
ful signal, you need to carefully adjust the input level of the GUITAR RIG MOBILE I/O.
GUITAR RIG MOBILE – 22