Loading Film - Mamiya C330 Instructions Manual

Loading Film

1
Open the back cover and pull
out the spool change knob (22), then
insert an empty spool into the take-
up spool chamber (38) so that it
engages the winding axis. Release
the spool change knob.
Pull out the spool change knob (29),
and insert a roll of film in the film
chamber (40).
9
PRECAUTIONS
By turning the spool change knobs
(22) and (29) either to the right or
left after pulling them outward, the
knobs stay at their protruded posi-
tions. Turn the knobs backward to
reinsert them.
If both spool change knobs are not
returned to their original positions
after loading a film, unbalanced film
winding will result.
Should the spool change knob not
return to its original position, move
the spool slightly to the front and
rear or up and down.
2
Pull out the leader paper of the
film and guide it into the slit of the
take-up spool, turn the film wind
crank (6) clockwise until the start
mark on the leader paper matches
the start marks (39) on the camera.