Replacing Engine Oil - Hisun Strike 250 Owner's Manual

■Replacing Engine Oil Filter
CAUTION
To avoid personal injury:

Be sure to stop the engine before
changing the oil filter cartridge.

Allow engine to cool down sufficiently,
oil can be hot and can burn.
1. Park the vehicle on a flat surface and raise
the cargo bed.
2. Remove the oil filter.
3. Put a film of clean engine oil on the rubber
seal of the new filter.
4. After the new filter has been replaced, the
engine oil normally decreases a little. Make
sure that the engine oil does not leak
through the seal and check the oil level on
the dipstick. Then replenish the engine oil
up to the prescribed level.
① Bolt; ② Cover
③ "O" seal ring;④ Engine oil filter
IMPORANT:

To prevent serious damage to the engine,
use only a genuine filter.
Periodic Service
10-11