Hisun Strike 250 Owner's Manual page 37

Hide thumbs Also See for Strike 250:
Table of Contents

Advertisement

NOTE
Make sure the parking brake warning lamp on
the display goes off when parking brake lever is
down.
[1] Release button
[2] RELEASE
[3] PULL
■ Checking gauges meter and warning
lamps
1.
Inspect the instrument panel for broken
gauges meter and warning lamps.
2.
Replace if broken.
■Checking head light turn signal light etc
1.
Inspect lights for broken bulbs and lenses
2.
Replace if broken
■Checking seat belt and ROPS
1.
Always check condition of seat belt and
ROPS attaching hardware before operating
vehicle.
2.
Replace if damaged.
Periodic Service
■Checking tire inflation pressure
Though the tire pressure is factory-set to the
prescribed level, it naturally drops slowly in the
course of time, thus check it every day and inflate
as necessary.
tire sizes
Front : 22x7x10
Rear:22x10x10
EVERY 50 HOURS
■Greasing
Apply a small amount of multi-purpose grease to
the following points every 50 hours. If you
operated the vehicle in extremely wet and muddy
conditions lubricate grease fittings more often.
[1] Parking brake pivot (spray type grease )
10-5
inflation pressure
70kPa (0.7kgf/cm2, 10psi)
75kPa (0.75kgf/cm2,
10psi)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents