Backing Up/Recovering The Settings (Recov./Backup); Restoring The Default Settings (Initialize); Updating The Firmware (Firm Update); Checking The Firmware Version (Version) - Yamaha AVENTAGE RX-A3050 Owner's Manual

Backing up/recovering the settings (RECOV./BACKUP)

RECOV./BACKUP
BACKUP
Creates backup of the settings of the unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO
to start the process.
Choices
BACKUP Creates backup of the settings of the unit in the internal memory.
Recovers the settings of the unit from the backup (available only when
RECOVERY
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).

Restoring the default settings (INITIALIZE)

INITIALIZE
CANCEL
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
FPL L C R FPR
SL SW1 SW SW2 SR
RPL SBL SB SBR RPR
FPL L C R FPR
SL SW1 SW SW2 SR
RPL SBL SB SBR RPR

Updating the firmware (FIRM UPDATE)

FIRM UPDATE
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware via the network" (p.163).

Checking the firmware version (VERSION)

VERSION
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "System" (p.155) in the "Information" menu.
• It may take a while until the firmware version is displayed.
159
En
USB
FPL L C R FPR
SL SW1 SW SW2 SR
RPL SBL SB SBR RPR
x.xx
FPL L C R FPR
SL SW1 SW SW2 SR
RPL SBL SB SBR RPR