Connecting A Tv - Yamaha AVENTAGE RX-A3050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
2

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.
■
HDMI connection
Connect the TV to the unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.41).
HDMI OUT jack
HDMI OUT
The unit
(HDCP2.2)
2 1
(rear)
(ZONE OUT)
ARC
HDMI
HDMI OUT
(HDCP2.2)
AV 1 AV 2
2 1
(ZONE OUT) (1 BD/DVD)
ARC
AV 1 AV 2 AV 3 AV 4
MONITOR OUT/
(1 BD/DVD) Y
ZONE OUT
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
A
Y AV
AUDIO 1 ZONE OUT/PRE OUT
L
(2 TV)
R
ZONE 2/ ZONE 3/
1 2 3 4 6 F. PRESENCE R. PRESENCE FRONT
GND OPTICAL OPTICAL COAXIAL COAXIAL 5 COAXIAL OPTICAL
SURROUND
R L
L
ANTENNA
(4 RADIO)
FM AM
75Ω
R
1
OPTICAL
O
AUDIO 1
(OPTICAL or AUDIO) jacks
• You do not make an audio cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit's
power and volume with the TV's remote control.
HDMI input
HDMI
HDMI
AUDIO
L
L
R
R
TV
OPTICAL
O
Audio output
(digital optical or analog stereo)
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see "Information on HDMI" (p.182).
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
39
En