Yamaha AVENTAGE RX-A3050 Owner's Manual page 122

■
Decoder Mode
Sets the format of digital audio playback to "DTS".
For example, if the unit does not detect DTS audio and outputs noise, set "Decoder
Mode" to "DTS".
Input sources
AV 1–7, V-AUX, AUDIO 1–3 (available only when any audio digital input jack is assigned)
Settings
Auto Automatically selects an audio format to match the input audio signal.
DTS Selects DTS only. (Other audio signals are not reproduced.)
■
Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Input sources
AirPlay
Settings
Off Disables volume controls from iTunes/iPod.
Enables volume controls from iTunes/iPod within the limited range
Limited
(-80 dB to -20 dB and mute).
Enables volume controls from iTunes/iPod in the full range (-80 dB to
Full
+16.5 dB and mute).
■
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input source
SERVER
Settings
Disable Does not allow DMCs to control playback.
Enable Allows DMCs to control playback.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
122
En