Removing The Limitation On Hdmi Video Output (Monitor Check); Selecting The Hdmi 4K Signal Format (4K Mode); Backing Up/Recovering The Settings (Recov./Backup); Restoring The Default Settings (Initialize) - Yamaha Aventage RX-A1050 Owner's Manual

Removing the limitation on HDMI video output
(MONITOR CHECK)
SP IMP. - MONITOR CHECK
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
YES
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution"
(p.119) when the unit cannot detect the TV's resolution or when you want to specify a
different resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a
YES
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after "MONITOR CHECK" has been set to "SKIP".

Selecting the HDMI 4K signal format (4K MODE)

SP IMP. - 4K MODE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
MODE 2
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz)
compatible TV and playback device are connected to the unit.
Settings
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
(4:2:0 format only for VIDEO AUX [HDMI IN] jack)
MODE 1
Depending on the connected device or HDMI cables, video may not
be displayed correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
• When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Backing up/recovering the settings (RECOV./BACKUP)

DOCK SP IMP. - RECOV./BACKUP
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
BACKUP
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Creates backup of the settings of the unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO
to start the process.
Choices
BACKUP Creates backup of the settings of the unit in the internal memory.
Recovers the settings of the unit from the backup (available only when
RECOVERY
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).

Restoring the default settings (INITIALIZE)

DOCK SP IMP. - INITIALIZE
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 CANCEL
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
133
En
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR