Yamaha AVENTAGE RX-A3050 Owner's Manual page 106

■
Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at
Zone2 or Zone4. If you connect an AV amplifier, you can enjoy multichannel playback in
another room (Zone4).
• To watch videos played back on a video device at Zone2 or Zone4, you need to connect the video device to
the unit with an HDMI cable (p.42).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen operations are not available for Zone2 and Zone4.
HDMI OUT 2
The unit (rear) (ZONE OUT) jack
HDMI OUT
(HDCP2.2)
2
HDMI (HDCP
HDMI OUT
(HDCP2.2)
(ZONE OUT)
2 1 AV 1 AV 2 AV 3 AV
(ZONE OUT) ARC (1 BD/DVD) HDMI
AV 1 AV 2 AV 3 AV 4
MONITOR OUT/
(1 BD/DVD) Y P B P R
ZONE OUT
1 AUDIO 2 AUDIO 3
A
Y AV 1 P P
B R
ZONE OUT/PRE OUT PRE OUT
(SINGLE)
ZONE 2/ ZONE 3/
FRONT SURROUND SUR. BACK
2 3 4 5 6 OPTICAL F. PRESENCE R. PRESENCE
AL OPTICAL COAXIAL COAXIAL COAXIAL
SURROUND SURRO
R L R
ANTENNA
(4 RADIO)
FM AM
75Ω
Main zone
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set "HDMI OUT2 Assign"
(p.149) in the "Setup" menu to "Zone2" or "Zone4".
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2 or Zone4
(Example: using an AV amplifier)
HDMI input
HDMI
HDMI
Zone4
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output
from the HDMI OUT 2 jack by setting "Audio Output" (p.149) in the "Setup" menu to "On" or "Off" (default).
• You can also use speakers placed in Zone2 to output audio (p.36).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings
106
En