Inserting A Memory Card - Kenwood KCA-DR300 Instruction Manual

Inserting a memory card

You must insert a memory card (may be sold separately) before you can start recording.
1. Hold the card by the edges and gently insert it into the slot with the label facing the
rear side of the recorder.
2. To remove a card, gently push the top edge of the card inwards to release it, and pull
it out of the slot.
NOTE:
ƒ DO NOT apply pressure to the centre of the memory card.
ƒ You are advised to use a Class 6 memory card with at least 8GB capacity. The
recorder supports memory cards with up to 32GB capacity.
ƒ The manufacturer does not guarantee the product's compatibility with memory
cards from all manufacturers.
ƒ Before you start recording, please format the memory card to avoid malfunction
caused by files not created by the recorder. You can format the card on your
computer or on the recorder (by selecting Settings Menu > Format).
ƒ You are recommended to turn the device off before removing the memory card.
6