Microsd Card Slot; Insert Your Microsd Card Into The Device; Hd Output - Kenwood DRV-A501W Instruction Manual

12.

microSD Card Slot

Insert your microSD card here. Push your memory card into the slot until you
hear a click.
(microSD card is inserted into microSD Card Slot at the factory shipment condition)

Insert Your microSD Card Into The Device

The device is designed to allow a standard microSD card to record your footage.
Before installing, make sure the gold end of the card is facing the LCD screen. Once
it's aligned with the slot, push the card in and listen for the CLICK that will confirm
it is secure.
TIP:
- If you cannot hear the CLICK, take a small coin by the edge and push on the
outside end of the card until the sound is made.
- Remember: DO NOT REMOVE OR INSERT THE MEMORY CARD WHILE THE
DEVICE IS TURNED ON.
- The device will power off automatically when you insert or remove the SD card.
13.

HD Output

The device can be connected to other screen by using the HD cable.
(commercially available)
12