Power Key; Led Indicators - Kenwood KCA-DR300 Instruction Manual

Power key

Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will start right after the recorder turns on.
You can perform the following using the Power key:
ƒ To manually turn the recorder on and off, press and hold
the Power key for 2 seconds.
ƒ When the recorder is turned on, press and release the
Power key to switch the LCD screen on/off.

LED indicators

The power cable is connected and the
recorder is on:
ƒ The battery is charging, and
- the recording is in progress.
- the recording is stopped.
ƒ The battery is fully charged, and
- the recording is in progress.
- the recording is stopped.
The recorder switches to Parking mode,
and:
ƒ The parking recording is in progress.
ƒ The parking recording is stopped.
Status LED 1
Green, Amber / Blinking
Green / On
Red / Blinking
OFF
Red / Blinking
OFF
3
LED 2
OFF
OFF
OFF
OFF
Red / Blinking
Red / Blinking