System Settings - D-Link DSL-2870B User Manual

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual

System Settings

To access the Device Info page, click on the Status menu link, at the top, and then click on the Device Info menu link, on the left.
On this page, the user can view information regarding the System, WAN Connectivity,
and LAN Connectivity.
In this section we can initiate the configuration backup, restore, restore to factory
default setting, save, and reboot the device feature.
Backup Settings: Once you have configured the router to your satisfaction, it is a
good idea to back up the configuration file to your computer. To save the current
configuration settings to your computer, click the Save button of Save Settings to
Local Hard Driver. You will be prompted to select a location on your computer to put
the file. The file type is bin and may be named anything you wish.
Restore Settings: To load a previously saved configuration file, click the Browse
button of Load Settings from Local Hard Driver and locate the file on your
computer. Click the Upload Settings button to load the settings from your local hard
drive. Confirm that you want to load the file when prompted. The router will reboot
and begin operating with the configuration settings that have just been loaded
Restore to Factory Default Settings: in this section, we can perform a factory reset
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
Page 111
here.