Table of Contents
Advertisement
Configuring the system settings
(ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
PROGRAM
STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE z to set the unit to standby mode and turn it on again.
The new settings take effect.
ADVANCED SETUP menu items
• Default settings are underlined.
Item
Function
SP IMP.
Changes the speaker impedance setting.
REMOTE ID
Selects the unit's remote control ID.
(Asia and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT
Switches the video signal type.
MON.CHK
Removes the limitation on HDMI video output.
4K MODE
Selects the HDMI 4K signal format.
INIT
Restores the default settings.
Item
Function
UPDATE
Updates the firmware.
VERSION
Checks the version of firmware currently installed on the unit.
Changing the speaker impedance setting (SP IMP.)
SP IMP.••8¬MIN
Change the unit's speaker impedance settings depending on the impedance of the
speakers connected.
Settings
6 MIN
8 MIN
Selecting the remote control ID (REMOTE ID)
REMOTE ID••ID1
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
Page
ID1, ID2
120
■
Changing the remote control ID of the remote control
120
1
To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for
121
3 seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for
121
3 seconds.
121
122
122
120
En
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
Select this option when you connect 8-ohm or higher speakers to the
unit.
Page
122
122
Hide quick links:
Advertisement
Table of Contents
