Connecting A Tv; Composite Video Connection; Hdmi Connection - Yamaha RX-V779 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
3

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.
■

HDMI connection

Connect the TV to the unit with an HDMI cable and a digital optical cable.
• (RX-V779 only)
You can connect another TV or a projector by using the HDMI OUT 2 jack (p.26).
HDMI OUT jack
The unit (rear)
HDMI OUT
HDCP2.2
2 1
TRIGGER OUT
12V 0.1A
ARC
HDMI 1 HDMI 2 H
HDMI OUT HDCP2.2 HDCP2.2 H HDMI
HDCP2.2
IN
2 1
(BD/DVD)
ARC
OUT
REMOTE
ANTENNA
OPTICAL VIDEO
(RADIO)
FM AM
(TV)
AV4
COAXIAL
AV3
P AV 4 (OPTICAL) jack
Y P B R Y P B P R
COM
OPTICAL
AV2
O MONITO
OPTICAL
(TV)
V
AV4
AV 1
COMPONENT VIDEO VIDEO
SING
ZONE 2 SUR. BA
AUDIO 1 AUDIO 2 AV 5 AV 6 ZONE OUT
• You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit's
power and volume with the TV's remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see "Information on HDMI" (p.139).
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
HDMI input
HDMI
HDMI
OPTICAL
O
TV
Audio output
(digital optical)
■
Component/composite video connection
When connecting any video device with a component video cable, connect the TV to
the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
• If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
❑ COMPONENT VIDEO connection (with a component video cable)
The unit (rear)
TRIGGER OUT
12V 0.1A
HDMI 1 HDMI 2 HDMI 3
HDMI OUT HDCP2.2 HDCP2.2 HDCP2.2
HDCP2.2
IN
2 1
(BD/DVD)
ARC Y
OUT
REMOTE
ANTENNA
OPTICAL VIDEO
(RADIO)
(TV) FM AM
AV4
COAXIAL
AV3
P Y P P
Y P B R B R
OPTICAL
COMPONENT
VIDEO
AV2
(TV) MONITOR OUT
OPTICAL
AV4
VIDEO
AV 1 COMPONENT VIDEO VIDEO
SINGLE
ZONE 2 SUR. BACK SURROUND
AUDIO 1 AUDIO 2 AV 5 AV 6 ZONE OUT
AV 4 (OPTICAL) jack
25
En
Video input
(component video)
COMPONENT
VIDEO
MONITOR OUT
P
R
(COMPONENT VIDEO)
jacks
P
P
R B
H
P
R P
B
P P
B R
COMPONENT
P B Y
Y
VIDEO
MONITOR OUT Y
OPTICAL
O
C
PR
Audio output
(digital optical)
TV