Broan QP130SSC Instructions Manual page 3

__,dm_ _ _m_m_,___ ® MODELS QP130BL.QP130BLC.QP130SS.QP130SSC
QP130WW * QP130WWC * QP136BL * QP136SS * QP136WW
Page 3
El Use the diagram below, for placement of
proper
ductwork and electrical cutout in cabinet or wall. For a
non-ducted installation, DO NOT cut a duct access hole.
* Note the extra wood shim and mounting screw near
the cabinet front, 4-7/8" to the right of the cabinet
center line.
HOOD MOUNTING SCREWS (5) l 31A '' X 10"
VERTICAL DUCTING
115/8 ' ' (30"hood) 115/8 ' ' (30"hood)
*'-'- 145/8 '' (36"
hood)
_ 145/8 '' (36"hood)
CABINET FRONT _ 47/8 "*
CABINET I _Q;" _"_
l VERTICAL DUCT I
123/8"
4½"½ |
ACC ES_
t t ELECTRICAL
WOOD SHIMS ACCESS HOLE
recessed-bottom CENTER
cabinets only) LINE (in cabinet bottom)
/
\
I
WOOD SHIMS J 31A'' X 10"
(recessed-bottom [ HORIZONTAL DUCTING
cabinets only)
CABINET FRONT 1½"
47/8'' _ 3/8,, _________.j
t 4t' HORIZONTAL DUCT
T
CABINET JL ACCESS HOLE
BOTTOM
8½"
.,---
115/8"
(30" hood) 115/8" (30" hood)
145/8 ''
(36" hood) 145/8" (36" hood)
HOOD t
ELECTRICAL
MOUNTING CENTER
ACCESS HOLE
SCREWS (5) LINE (in wall)
HOOD MOUNTING SCREWS (5)
115/8"(30"hood)
i 145/8"(36"hood)
I
:lCAB'NET
BOTTOM
WOOD SHIMS t
(recessed-bottom CENTER
cabinets only) LINE
115/8" (30" hood)
145/8'' (36" hood)
47/8''
r 7-IN. ROUND DUCTING
81_2 I' ,=...._
ELECTRICAL t
ACCESS HOLE
(in cabinet bottom)
PREPARE THE HOOD
Remove parts bag from inside the foam packaging end
cap.
Remove all protective polyfilm from the hood (stainless
steel hoods only).
PULL /
DOWN
LIFT ALUMINUM
OUT FILTERS
Remove the Aluminum Filters from the hood.
DAMPER /
DUCT CONNECTOR
[_ emove 2 screws holding Damper / Duct Connector to
hood. Remove damper/duct connector from inside the
hood.
FOR DUCTED INSTALLATIONS = Skip to Step 9.