Advertisement
3¼" X 10"
HORIZONTAL
KNOCKOUT
PLATE
12 DUCTED INSTALLATION ONLY:
Remove 3¼" x 10 vertical, 3¼" x 10" horizontal, or 7-inch
round knockout plate(s) as appropriate for your ducting
method.
TOP/BACK
EDGE OF
HOOD
7" ROUND
DUCT
PLATE
13 DUCTED INSTALLATION ONLY:
Attach 3¼" x 10" Damper/Duct Connector (if using 3¼"
x 10" duct) or 7" Round Duct Plate (if using 7-inch round
duct) over the knockout opening.
Notes:
To accomodate off-center ductwork, the 3¼" x 10"
damper/duct connector can be installed up to ½" on either
side of the hood center and the 7" round duct plate can
be installed up to ½" on either side of the hood center.
Install the 3¼" x 10" Damper/Duct Connector with the
Damper Flap Pivot nearest the Top/Back Edge of
Hood.
MODELS QP230BC • QP230BL • QP230SS • QP230WW
7" ROUND
KNOCKOUT
PLATE (also
remove 3¼" x 10"
vertical plate)
3¼" X 10"
VERTICAL
KNOCKOUT
PLATE
3¼" X 10"
DAMPER /
DUCT
CONNECTOR
DAMPER
FLAP
PIVOT
QP236BC • QP236BL • QP236SS • QP236WW
QP242BC • QP242BL • QP242SS • QP242WW
INSTALL THE HOOD
WARNING
To reduce the risk of electrical shock, switch power off
at service panel. Lock or tag service panel to prevent
power from being switched on accidentally.
ELECTRICAL
POWER
CABLE
KNOCKOUT
14
Remove Electrical Wiring Box Cover from inside
of hood and appropriate Electrical Power Cable
Knockout from top or back of hood.
HOUSE
POWER CABLE
15
Run House Power Cable between service panel and hood
location. Attach power cable to hood using appropriate clamp.
16
Hang hood from (4) mounting screws driven part-way into
cabinet locations (shown in illustrations under "PREPARE
HOOD LOCATION"). Mounting screws are included in parts
bag. Slide hood back towards wall until mounting screw
heads are engaged in narrow end of keyhole slots in top of
hood. Tighten screws securely. Add 5th mounting screw in
center hole in hood and tighten securely.
DUCTED INSTALLATION ONLY:
17
Connect ductwork to hood and use duct tape to make joints
secure and air-tight. Make sure the damper / duct connector
enters the ductwork and that the damper opens and closes
freely.
Page 5
ELECTRICAL
WIRING BOX
COVER
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Broan QP230BC
Summary of Contents for Broan QP230BC
- Page 1 MODELS QP230BC • QP230BL • QP230SS • QP230WW QP236BC • QP236BL • QP236SS • QP236WW QP242BC • QP242BL • QP242SS • QP242WW Page 5 INSTALL THE HOOD 7” ROUND KNOCKOUT PLATE (also WARNING remove 3¼” x 10” To reduce the risk of electrical shock, switch power off vertical plate) at service panel. Lock or tag service panel to prevent power from being switched on accidentally. 3¼” X 10” VERTICAL KNOCKOUT 3¼” X 10” PLATE HORIZONTAL ELECTRICAL KNOCKOUT WIRING BOX PLATE COVER 12 DUCTED INSTALLATION ONLY: Remove 3¼” x 10 vertical, 3¼” x 10” horizontal, or 7-inch round knockout plate(s) as appropriate for your ducting method. 3¼” X 10” ELECTRICAL DAMPER / POWER DUCT CABLE CONNECTOR KNOCKOUT...
- Page 2 EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ROTATE During this one year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and CLOCKWISE service.
- Page 3 MODELS QP230BC • QP230BL • QP230SS • QP230WW QP236BC • QP236BL • QP236SS • QP236WW QP242BC • QP242BL • QP242SS • QP242WW Page 7 SERVICE PARTS KEY NO. PART NO. DESCRIPTION 97017727 7” Round Duct Plate (includes mounting hardware) 97018245 User Interface Assembly White (includes interface, nameplate, mounting hardware) 97018246 User Interface Assembly Black (includes interface, nameplate, mounting hardware) 97018247 User Interface Assembly Bisque (includes interface, nameplate, mounting hardware) 99528248 Nameplate, White 99528249 Nameplate, Black 99528250 Nameplate, Bisque 97018251 Capacitor Kit (includes wire nuts, mounting screw) 97018225 Light Panel RH White (includes mounting hardware) 97018226 Light Panel RH Black (includes mounting hardware) 97018227 Light Panel RH Stainless (includes mounting hardware) 97018228 Light Panel RH Bisque (includes mounting hardware) 97018202 Filter Kit for 30”” (2 per bag) 97018203 Filter Kit for 36” (2 per bag) 97018204 Filter Kit for 42” (3 per bag)
Need help?
Do you have a question about the QP230BC and is the answer not in the manual?
Questions and answers