Advertisement
HOW TO OPERATE THE CONSOLE
Note: If there is a piece of clear plastic on the face of
the console, remove it before operating the console.
1. To turn on the power, press the console button or
simply begin pedaling. When the power is turned
on, the entire display will appear for two seconds.
The console will then be ready for operation.
2. Select one of the five modes:
Scan mode--
Mode Indicators
When the power
is turned on, the
scan mode will
_A
automatically be
selected. One
mode indicator
will show that
the scan mode
is selected, and
a flashing mode indicator will show which mode is
currently displayed. Note: If a different mode is
selected, you can select the scan mode again by
repeatedly pressing the console button.
,
,
Speed, time,
1
I
distance or
calorie mode--
A
To select one of
!
these modes for
t
V
continuous dis-
play, press the
console button
repeatedly. The
mode indicators will show which mode is selected.
Make sure that the scan mode is not selected.
I
To reset the display, hold down the console button
for two seconds. After the display is reset, the scan
mode will be selected.
To turn off the power, simply wait for about four min-
utes. Note: The console has an "auto-off"
fea-
ture. If the pedals are not moved and the con-
sole button is not pressed for four minutes,
the
power will turn off automatically
in order to con-
serve the batteries.
7
Advertisement
