Electronic Oven Controls; Display; Cancel; Settings - Maytag MET8820DS00 Use & Care Manual

ELECTRONIC OVEN CONTROLS
A C
upper oven
bake broil keep
warm
Lower Oven
bake broil keep .....
warm
options
cook delay favorite self
time start clean
kitchen clock oven settings
timer light
on/off
warming center
convect convect convect
bake broil roast
K J
H G F
on off
0 0
0®0
E D
A. Upper oven settings
B. Oven display
C. Options settings
D. Oven fight
E. Cooktop warming center
F. Lower oven cancel
G. Upper oven cancel
H. Start
I. Temp/time
J. Lower oven settings
K. Convect settings
When power is first supplied to the range or if a power failure
occurs, "12:00" will appear on the display. See "Clock" in the
"Settings" section to set time of day.
When the oven is not in use, the display shows the time of day.
The Cancel pads stop any function except the Clock, Timer and
Control Lock.
8 Jes
While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. Both oven lights will come on when either door is
open. The oven lights will not come on during the Self-Clean cycle.
The Kitchen Timer can be set in hours or minutes up to 9 hours and
59 minutes, and counts down the set time. The Kitchen Timer does
not start or stop the oven.
To Set:
1. Press KITCHEN TIMER.
"Set TIMER" will scroll down the upper text display area, and
the clock will display "--:--" with the colon flashing.
2. Press the Temp/Time "+" or "-" pads until the desired time is
reached.
"Press TIMER" will scroll down the upper text display area.
3.
4,
Press KITCHEN TIMER to start the timer. The colon stops
flashing, and the time begins counting down. "TIMER
STARTED" will scroll down the upper text display area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
"TIMER End" will be displayed.
Press KITCHEN TIMER to clear the display.
NOTE: A reminder beep will sound until the Kitchen Timer is
canceled.
To Cancel:
Press KITCHENTIMER.
Settings enables you to personalize audible tones and oven
operation to suit your needs. After completing your adjustments,
press a CANCEL key or wait 30 seconds for the display to show
the time of day.
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
"TEMP UNIT" appears in the upper text area. "FAHRENHEIT.
Press (+) for Celsius" will scroll twice in the lower text area.
2.
Press the Temp/Time "+" pad to change the temperature unit
setting.
"CELSIUS. Press (+) for Fahrenheit" will scroll twice from right
to left in the lower text area.
3. "CELSIUS Selected" will scroll twice from right to left in the
lower text area. The temperature units have been changed.