Operation
Backlight Colour
1. Press [MENU] 12 times.
The current Backlight colour (CLEAR,
BLUE, RED, PURPLE, GREEN, CYAN
or YELLOW) setting flashes.
2. Turn the Rotary Channel Selector to
change the desired colour setting.
3. Press and hold [MENU] to save &
exit from the menu mode
Backlight Level
1. Press [MENU] 13 times. The Backlight level (LIGHT) setting flashes.
2. Turn the Rotary Channel Selector to change the setting between OFF, 01, 02 and
03.
3. Press and hold [MENU] to save & exit from the menu mode.
LCD Contrast
1. Press [MENU] 14 times. The LCD Contrast
setting flashes.
2. Turn the Rotary Channel Selector to change
the setting between 01 (low contrast) to
10 (high contrast).
3. Press and hold [MENU] to save & exit from
the menu mode.
Simple Mode Setting
Simple Mode is the ability to view a large channel number on the main unit for the UCB
Channel (CH01-CH80).
1. Press [MENU] 15 times. The Simple mode (SIMPLE) setting flashes.
2. Turn the Rotary Channel Selector to change the setting between ON or OFF.
3. Press and hold [MENU] to save & exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8050S
33
UHF CB Transceiver