Kenmore 11065202310 Installation Instructions Manual page 19

Remove the door catch_ bezel, and plug from the inside of the inner
door by squeezing and pulling/pushing them. Place the door catch,
bezel, and plug on the sides opposite from where they were.
Reattach door hinges to dryer door so that the larger hole is at the
bottom of the hinge.
Rotate outer door 180 ° and set it back down on inner door. Reattach
outer door panel to inner door panel so handle is on the side where
hinges were lust removed. Insert 4 door screws.
8. Flip door over
Remove door strike and door strike plug from dryer cabinet, insert
the door strike into door strike plug hole and secure with screw, insert
door strike plug into original door strike hole and secure with screw.
Flip door over so handle side is down.
19