Amana NED5800DW0 Installation Instructions Manual page 21

Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
Reverse door swing round=shaped door - double handle
IMPORTANT: If the protective film has not yet been removed
from the dryer, peel the film from the dryer door before
proceeding.
Using a TORX®T25 ® screwdriver, remove the 4 screws
securing the door hinge to the dryer and lift up and out to
remove the door. Place the door on a soft towel or other
non-scratch surface. Reinstall the 4 screws in the holes.
f_,'_ Move the door strike
Using a TORX®T25 ® screwdriver, remove the 4 screws on the
dryer. Insert the tabs on the hinge into the mounting slot and
slide down to engage the top tab. Secure in place with
the 4 TORX®T25 ® screws removed earlier.
®
®
®
®
®
®
®
®
Using a TORX®T25 ® screwdriver, remove the 2 screws
securing the door strike to the door frame of the dryer. Rotate
the strike 180 ° and attach to the opposite side of dryer door
frame, as shown.
21