Ultra Power UP300AC Touch Instruction Manual page 9

WARNING AND SAFTEY NOTE
Batteries installed in a device or which are electrically linked to
other components
Batteries that are not expressly stated by the manufacturer to be
suitable for the currents the charger delivers during the charge
process
Please bear in mind the following points before commencing
charging:
Did you select the appropriate program suitable for the type of
battery you are charging?
Did you set up appropriate current for charging or discharging?
Have you checked the battery voltage? Lithium battery packs can
be wired in parallel and in series, i.e. a 2-cell pack can be 3.7V (in
parallel) or 7.4V (in series).
Have you checked that all connections are rm and secure? Make
sure there are no intermittent contacts at any point in the circuit.
WARNING! By setting the TVC to any POSITIVE SETTING above default value,
you ACCEPT ALL RESPONSIBILITY for DAMAGE to your battery, FIRE, INJURY,
and any other loss which may result. If you do not agree to accept all risk, DO
NOT OPERATE YOUR CHARGER UNLESS ALL TVC POSITIONS ARE SET TO
DEFAULT VALUE!
Standard Battery Parameters
Nominal
3.7V/cell
Voltage
Max Charge
4.2V/cell
Voltage
Storage
3.8V/cell
Voltage
Allowable
≦1C
Fast Charge
Min. Discharge
3.0-3.3V/cell
Voltage
Be very careful to choose the correct voltage for different types of
battery otherwise you may cause damage to the batteries. Incorrect
settings could cause the cells to re or explode.
LiPo LiIon
3.6V/cell
4.1V/cell
3.7V/cell
≦1C
2.9-3.2V/cell
LiFe NiCD
3.3V/cell
1.2V/cell
3.6V/cell 1.5V/cell
3.3V/cell n/a
≦4C
1C-2C
2.6-2.9V/cell 0.1-1.1V/cell 0.1-1.1V/cell
7
MiMH Pb
1.2V/cell 2.0V/cell
1.5V/cell 2.46V/cell
n/a n/a
≦0.4C
1C-2C
1.8V/cell